| | | Click on a title to see more information |
|
ISBN
1 84569 686 7
Published
October 2009
Price
£125.00 / US$210.00 / €155.00
|
Maraging steels: Modelling of microstructure, properties and applications 
Sha, Guo
Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstruct... more...
Usually dispatched within 24 hours
|
|
ISBN
1 84569 178 4
Published
March 2008
Price
£170.00 / US$290.00 / €210.00
|
Creep-resistant steels
Abe, Kern, Viswanathan
Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in se... more...
Usually dispatched within 24 hours
|
|
ISBN
3 514 00745 4
Published
January 2008
Price
£25.00 / US$40.00 / €30.00
|
Steel manual (Third edition)
Usually dispatched within 1–2 weeks
|
|
ISBN
1 85573 766 3
Published
July 2004
Price
£125.00 / US$210.00 / €155.00
|
The alloy tree: A guide to low-alloy steels, stainless steels and nickel-base alloys
Farrar
There are certain key alloys, stainless steels, nickel alloys and low alloy steels that are of paramount importance to the power generation, petrochemical and oil and gas industries. In one fully comp... more...
Usually dispatched within 24 hours
|
|
ISBN
1 84265 129 3
Published
May 2004
Price
£55.00 / US$95.00 / €70.00
|
High nitrogen steels and stainless steels: Manufacturing, properties and applications
Raj
This authoritative book covers manufacturing methods for and the key properties of these important steels and their alloys. more...
Usually dispatched within 24 hours
|
|
ISBN
1 85573 719 1
Published
September 2003
Price
£1000.00 / US$1700.00 / €1250.00
|
Buyer's guide to sourcing castings from India
India offers global industries the opportunity to buy quality products at extremely competitive prices. It has become a much favoured source for castings, and buyers from around the world have shown t... more...
Usually dispatched within 24 hours
|
|
ISBN
3 514 00637 7
Published
January 1999
Price
£25.00 / US$40.00 / €30.00
|
Melting and mixing of alloying agents in steel melts
Zhang, Oeters
This title includes: The shell period; Melting and dissolution of the particle core; Determination of heat and mass transfer coefficients; Calculation and dissolution of ferro-alloy particles containi... more...
Usually dispatched within 1–2 weeks
|
|
ISBN
1 85573 318 8
Published
October 1997
Price
£140.00 / US$240.00 / €175.00
|
Duplex stainless steels: Microstructure, properties and applications
Gunn
Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands the... more...
Usually dispatched within 24 hours
|
|
ISBN
3 514 00378 5
Published
February 1993
Price
£135.00 / US$230.00 / €170.00
|
Volume 2: Applications
The greater part of this volume deals with matters under the heading "Steels with characterizing properties for specific fields of application". The remainder of the volume deals with the influence of... more...
Usually dispatched within 1–2 weeks
|
|
ISBN
1 85573 132 0
Published
January 1993
Price
£135.00 / US$230.00 / €170.00
|
Toughness requirements for steels: An international compendium
Phaal, Wiesner
This compendium, compiled by two senior engineers from TWI, draws together information from more than 150 individual specifications, covering national, international and industrial toughness requireme... more...
Usually dispatched within 24 hours
|
|
ISBN
3 514 00377 7
Published
January 1992
Price
£135.00 / US$230.00 / €170.00
|
Volume 1: Fundamentals
The book is divided into two parts: Part A discusses the metallurgical and physical interactions by which microstructures are generated. Part B describes the interdependence between these microstructu... more...
Usually dispatched within 1–2 weeks
|